Safety Plus Bolt Projecting

Data Sheet 85

DESCRIPTION

SafetyPlus™ is an all steel high performance expansion anchor, suitable for the most demanding safety critical applications. This range offers

exceptional tension, shear and combined load performance in concrete.

Suitable for use in:

Concrete.

Features

1. 8.8 grade stud with slot for final adjustment.

2. High strength steel washer.

3. Sleeve provides maximum shear load performance.

4. Integral controlled collapse

and anti-rotation feature ensures fixture is firmly secured.

5. Unique zig-zag feature provides balanced

expansion ensuring secure setting and maximum load

carrying capacity.

6. Case-hardened nut with optimum angle taper for maximum expansion.

7. Nut and washer allow for fixture to be removed and relocated easily.

Size Chart

Specification Data

Reduction Factors - Edge and Spacing Distances For SafetyPlus™ Bolt Projecting

The full characteristic edge and spacing distances shown in the table above are the minimum allowable for the quoted DESIGN

RESISTANCE or RECOMMENDED LOAD, depending on your design method. Where these dimensions are not achievable, the appropriate reduction factor/s from the tables below must be applied to the

DESIGN RESISTANCE or RECOMMENDED LOAD.

Choose the required bolt diameter across the top of the appropriate table and read down the left hand column until actual edge or spacing distance is found. Read off the reduction factor where the two lines intersect (interpolate as required). Multiply this factor by the DESIGN RESISTANCE or RECOMMENDED LOAD quoted in the table. On the occasion that multiple close edge and/or spacing distances occur, the appropriate reduction factors must be applied.