The fischer hammerfix is simply tapped in with a hammer - DONE! Screwdrivers or electric screwdrivers are thus superfluous. This saves time and effort.
The fixing was developed for push-through assembly as proven in practice
and is supplied with pre-assembled nail screw - optionally with zinc plated,
stainless steel or plastic nails. The crossdrive recess Z enables loosening
of the fixing for subsequent adjustment.
To fix thin profiles and sheets, we recommend fischer nail fixings with flat collars, in order to avoid damage or puncturing.
The fixings are manufactured from the same high-grade and quality-monitored polyamide (nylon) which is also used for the frame fixings with general building inspectorate approval. The material is temperature-resistant from -40° to +80°C.
As a result of the neat internal and external geometry in conjunction with the high-grade material and the special nail geometry, the fischer hammerfix guarantees constantly good pull out loads and installation results. Even in the case of assemblies through damp timber battens, the fixing will not expand prematurely.

Type S Plugs

Data Sheet 37

Full Fischer catalogue available on request

Suitable for wood and chipboard screws. Locking lugs prevent rotating in the drill hole. No rim for through fixing. Expansion pressure at the bottom of the drill-hole, not at the neck of the fixing (no splitting of render and tiles). Direction of expansion can be selected (important for fixings close to the edge). High load characteristics in solid bricks, perforated bricks and hollow blocks.

Type S-RT Frame Fixings

Expansion part is based on the construction of the fischer S-plug which has proven itself millions of times. Suitable for interior and exterior use (facade, roof). Comprehensive product range with a variety of safety screws, pre-assembled. Also available without screws. Building-inspectorate approval in Germany, France and Sweden. Optimum screw control and corrosion protection . Integrated setting lock prevents pre-expansion of the fixing . In the case of fixing sets (= pre-assembled) screw and fixing are perfectly

Suitable for:

concrete, lightweight concrete, sand-lime solid bricks, solid red bricks, clinker bricks, solid pumice, perforated pumice, gypsum plasterboards, natural stone etc.

For fixing:

Timber battens, wooden laths, facade and roof substructures metal and plastic, window and door frames, metal profiles, insulants, fireproof doors, panels, cladding etc.

N-Z Hammerfix

For fixing:

All kinds of timber including laths, frames, wall connection- or render profiles, perforated profiles, wall

angles, cable ducts, cable and pipe clips, sheets etc.